top of page
3DME_DMP_Flex_100
3D-Systems_Dental_2
3D-Systems_Dental_4
3D-Systems_Dental_3
3D-Systems_Dental_1
3d_systems_DMP_Dental_100_LaserForm_CoCr_C_Dental_Crowns_09_72dpi (1) (1)
DMP Dental 100

ENTRY LEVEL DENTAL METAL PRINTER FOR EXCEPTIONAL QUALITY NOW UP TO DOUBLE SPEED

Manufacture small, dense, complex dental prostheses with excellent surface quality and short post-processing at high productivity. High-performance dental software solution streamlines your workflow.

DMP Dental 100 system enables you to use Direct Metal Printing (DMP) to produce high-quality, metal dental prostheses. Dental laboratories can now eliminate various steps and substantially reduce unit cost per crown or partial, while maintaining or increasing quality. With its 3.94 x 3.94 x 3.15 in (100 x 100 x 80 mm) build platform, certified medical grade Ni-free CoCr materials for dental use, manual loading of materials and an optional external recycling station, the DMP Dental 100 is a perfect starting point for dental laboratories.

​

Now up to double productivity with shortest post processing

​

Due to its higher power the 3D Systems entry level dental metal 3D printer now achieves up to double the productivity of its predecessor ultimately leading to reduced per part cost and faster delivery times. Print more than 90 crowns within under 4 hours, in one single print-run. DMP Dental 100 runs with a proprietary roller and very small powder particle sizes, leading to the shortest post processing time in the market. For the 90 crowns for example, stress relieve takes no more than 25 minutes. 

​

Best surface finish, less supports

​

With a superior surface finish quality less post-processing is required. Improved surface quality ultimately mean less of the labor intensive post processing and less material usage for your laboratory – saving time and cost.

​

Outstanding accuracy for the perfect fit

​

The typical accuracy is +/- 0.002 inches (+/- 50 μm), allowing a perfect fit for every patient. Repeatability from part to part is approximately 0.0008 inches (20 μm).

​

Dental software to streamline workflow in laboratories

​

To streamline your workflow, the DMP Dental 100 printer comes with LaserForm CoCr (C) material (ISO 13485, ISO 9001, FDA and CE qualified) and includes a high-performance software solution for managing the manufacture of fixed and removable dental prostheses. This seamless, intuitive interface quickly guides you from dental file import to the creation of manufacturing files. Together with certified

APPLICATIONS:

FEATURES:

BENEFITS:

  • Dental partials

  • Crowns

  • Bridges

  • Uses Direct Metal Printing (DMP) technology

  • Max build envelope capacity
    (W x D x H): 3.94 x 3.94 x 3.15 in
    (100 x 100 x 80 mm)

  • Certified Ni-free CoCr materials for dental use

  • Fully dense parts, no porosity

  • Highest precision

  • Surface finish quality of up to 200 Ra micro inches (5 Ra μm)

  • Intuitive dental production software for part set-up and production

  • Complete solution (printers, materials, software and application support)

  • Exceptional surface finish and resolution

  • Minimal waste of materials

  • Consistently high accuracy parts even on first-time builds

  • Ease of use - intuitive workflow

Materials

LaserForm CoCr (B) and (C)

LaserForm CoCr (B) and (C).png
bottom of page